Skip to main content

PEW Jaw Crusher

Max Feeding 2000(mm)
Capacity 65-1590(t/h)
Discharge Opening 0-450(mm)

The PEW series jaw crusher jaw broken, commonly known as euro euro is my company following the traditional jaw crusher after the development of a new type of crusher.The product is the perfect combination of modern science and technology and production practice, is the first selection of high efficiency crushing hard and strong corrosive material products.


  1. Adopt world-class manufacturing technology, choose the top production materials
  2. The more advanced dynamic jaw assembly, make it more durable.Moving jaw assembly adopts the high quality steel structure, and through two large cast steel wheel transmission.In addition heavy eccentric shaft forging stock also USES for processing, all make the JCE series jaw crusher with extraordinary reliability
  3. The whole cast steel bearing can guarantee with broken frame completely, but also greatly enhance the radial strength of the bearing, and split type bearing seat don't have the advantages
  4. The finite element analysis technology, crusher has higher strength
  5. Crushing cavity use semmetry "V" shape structure, make the actual inlet width is consistent with the nominal inlet width
  6. The discharging mouth is more quick and convenient adjustment.Euro PEW series jaw crusher with wedge discharging mouth adjusting device, the device is better than old gasket adjustment is simple, safe and fast
  7. All the PEW series jaw crusher with crusher bigger and more durable than other same specification of the eccentric shaft bearing, higher bearing capacity and the effective labyrinth seal bearing is greatly extend the service life
  8. Using the latest toothed plate, increase the effective length of jaw, and higher yield

Working Principle

Motor drive belt and pulley, make through eccentric shaft hubei bobbing up and down before and after, when the moving jaw promote dynamic jaw plate to the fixed jaw plate movement, material is crushed or broken.When the moving jaw and moving jaw plate under the action of eccentric shaft, spring back, previously has been crushed or cut broken material from the bottom of the jaw plate discharging mouth eduction.As the motor turns continuously and broken motor hubei as periodic pressure and discharge material, realize batch production.

Operation Specification

  1. Normal operation before feeding production
  2. To be crushed material should be evenly to join the crusher cavity, should avoid to lateral loading or loading, with in order to avoid unilateral overload or bear overload
  3. The normal work, bearing temperature rise shall not exceed 30 ℃, the highest temperature should not exceed 70 ℃.More than the temperature, should immediately stop, find out the reason and elimination
  4. Stop before, should first stop charging, after being broken cavity material completely discharge, may shut off the power
  5. When broken, such as parking, caused by crushing cavity material obstruction should immediately shut off the power to stop operation, after crushing cavity clean material, before starting any
  6. After jaw side wear, adjustable head use
  7. It should be tight bushing to tighten after using a period of time, in case the adapter bushing is loose and damage the machine


PEW jaw crusher is widely used in the crushing of various ores and bulk materials in mine smelting, building materials, highway, railway, water conservancy and chemical industry.

Crushing materials

River pebble, granite, basalt, iron ore, limestone, quartzite, diabase, iron ore, gold mine, copper mine, etc., and various ores and rocks with compressive strength not exceeding 320MPa.

Technical Data

Model Feed opening (mm) Maximum feeding size (mm) Range of discharge opening (mm) Capacity (t/h) Speed (r/min) Power (kW) Overall dimension (mm)
PEW250×1000 250×1000 220 20-40 15-50 330 30 1400×1850×1310
PEW250×1200 250×1200 220 20-40 20-50 330 37 1400×2050×1310
PEW400×600 400×600 350 35-85 15-70 250 37 1920×1460×1840
PEW760 760×1100 640 75-200 150-350 270 110 2600×2500×2200
PEW860 860×1100 720 100-225 200-500 240 132 3300×2320×3120
PEW1100 1100×1200 930 150-275 300-650 210 185 4140×2660×3560

Related Products

PE Jaw Crusher Series

Product Description

PE series jaw crusher is usually used as primary crusher in quarry production lines, mi

PF Impact Crusher

Product Description

By absorbing the advanced technology from the world, we researched and designed PF seri

Hydraulic Cone Crusher

DBM Hydraulic series Cone Crusher (Hydraulic) adopts computer optimization design to speed up main shaft speed.

Get a quote or solution!

If you are interested in our products, please communicate with us for detailed solutions and quotations.