Heavy hammer crusher

Introduction

Heavy hammer crusher is also called two-in-one crusher. The heavy hammer crusher is a new crusher developed on the basis of the traditional crusher. Different from the traditional crusher which needs primary and secondary crushing, heavy hammer crusher with novel structure is composed of box, rotor, hammer, impact lining plate, sieve plate, etc. The main working part of heavy hammer crusher is the rotor with hammer. The rotor consists of spindle, disc, pin and hammer. The heavy hammer crusher has the advantages of large feed size, one-time forming, cost saving and wide application.

Applications

The heavy hammer crusher is used to crush all kinds of medium hard and weak abrasive materials. The compressive strength of the material shall not exceed 100MPa and the moisture content shall be less than 15%.

Crushing materials

Coal, salt, chalk, gypsum, brick, limestone, etc.

Features and advantages

• Low operation cost

The heavy hammer crusher has large feed particle size and small discharge particle size, changing three-stage crushing into one-stage crushing, and completely realizing the low-cost operation of one top breaking and two top breaking. Therefore, the cost can be reduced by 35%. It is a low energy consumption, low investment equipment.

• Reduce wear and prolong service life

The heavy hammer crusher, also known as the giant stone crusher, is based on the mechanical principle of ordinary hammer crusher, impact crusher, vertical shaft hammer crusher and various hammers (plate hammer) for crushing stone. After optimization design, a new generation of crushing machinery products are produced, which changes the method of controlling the particle size of discharging materials by grate bars, and reduces the wear of hammers in the crushing cavity, The service life of hammer head is increased by 4-6 times. It has achieved a major breakthrough in crushing technology and achieved twice the result with half the effort.

• Excellent accessories

The heavy hammer crusher produced by our company adopts excellent accessories, especially the material selection of wear-resistant parts. The hammer head made of chromium alloy is the current domestic professional technology and wear-resistant metal parts.

• Less pollution and environmental protection

It can crush wet materials, that is to say, water can be added when crushing wet materials to reduce dust pollution and protect workers' health and environment.

• All models

Our company has a variety of models of machines, crushing capacity from 50-1000t / h to meet the various needs of customers, we certainly have a suitable for you.

Working principle:

The heavy hammer crusher mainly relies on the impact energy to complete the crushing operation. When the hammer crusher is working, the motor drives the rotor to rotate at a high speed, and the material evenly enters the crusher cavity. The hammer head of high-speed rotation impacts, shears and tears the material, causing the material to be broken. At the same time, the gravity of the material itself causes the material to rush from the hammer head of high-speed rotation to the baffle and screen bar in the frame, the material larger than the size of the screen hole remains on the screen plate, and continues to be hit and ground by the hammer until it is crushed to the required discharge particle size, and finally discharged out of the machine through the screen plate.

Technical Data：

Technical Data：