CS Cone Crusher
Comparing with other kinds of crushers, CS Series spring cone crusher is quite excellent in hard material crushing and the final product has good sharp. The innovations like stable lubrication system and excellent sealing system evidently reduce the production cost, helping you to achieve the highest level of profitability.
CS series cone crusher is applied to cement mill, mining, building construction, road &bridge construction, railway construction and metallurgy and some other industries. Materials like iron ore, granite, limestone, quartzite, sandstone, cobblestone and some others are easily crushed by cone crusher
Cone crusher is widely used in crushing chrome ore, basalt, granite and other brittle materials with high hardness.
- Safe and stable operation
The use of circular bevel gear makes the equipment run more stable, noise less and transmission efficiency higher; Hydraulic protection, after overload, the crushing chamber will be reset automatically.
- Large output
The perfect combination of stroke, swing frequency and crushing cavity makes the output of the machine increase by more than 40% compared with spring cone crusher; The high swing frequency, large stroke and high energy input, the material is laminated and crushed in the crushing chamber, and the cube content in the product is obviously increased.
- Easy to use.
Adjust the size of the discharge port, which is convenient for remote control of product size, saving labor and trouble; It is easy to replace the vulnerable parts, and completely get rid of the trouble of filling when replacing the vulnerable parts of the spring cone crusher.
- Strong bearing capacity
The main shaft is supported at both ends, which can bear greater crushing force and greater stroke.
- High yields and high grade final products.
- With grease seal and upstage sealing element imported from Japan, provide sturdy guarantee for long-playing stable operation of machine.
- Overload protective system can effectively ensure safety of crusher.
- Easy to control discharging size by using different crushing cavity and adjusting device.
|Model||Movable Cone Diametermm (inch)||Chamber Style||Opening Side||Closed Side||Discharging Opening (mm)||REV (r/min)||Power (kw)||Motor Model||Capacity (t/h)||Machine Size (mm)|
|CSB75||900 (3′)||medium||83||102||9~22||580||6-75||Y315S-6/75||45-91||2821×1880 ×2164|
|CSD75||914 (3′)||fine||13||41||3~13||580||6-75||Y315S-6/75||27-90||2821×1880 ×2410|
|CSB160||1295 (4 1/4′)||fine||109||137||13-31||485||6-185||Y355M2-6/185||109-181||2800×2342 ×2668|
|CSD160||1295 (4 1/4′)||fine||29||64||3~16||485||6-160||Y355M1-6/160||36-163||2800×2342 ×2668|
|CSB240||1650 (5 1/2′)||fine||188||209||16-38||485||6-240||181-327||3911×2870 ×3771|
|CSD240||1650 (5 1/2′)||fine||35||70||5~13||485||6-240||90-209||3917×2870 ×3771|
|CSB400||2134 (7′)||fine||253||278||19-38||435||6-400||381-726||5200×4300 ×4700|
|CSD400||2134 (7′)||fine||51||105||5~16||435||6-400||190-408||5200×4300 ×4700|