Centrifugal concentrator separator
Gold Centrifugal Concentrator is based on the law of centrifugal force and it has been developed and improved on the traditional centrifuge which could save much energy.Alleviated the suction effect,heavy grains get full settlement in the mineral which greatly improve the equipment Specific ability of selection and recovery rate that can up to more than 90%.
Gold Centrifugal Concentrator is composed by the pipe, track, tailing tank.drive motor,vertical axis and mineral processing components with other components.The ore-forming parts are divided into inner and outer layers.the inner layer is a conical cone made of stainless steel and has many small holes with the a ring grid.the outer layer made of ordinary steel form a closed water jacket with the inner.
The transmission shaft is a hollow, the pressure water is transported to the closed jacket though the hollow shaft. The water jet is continuously injected from the inner hole to form the reverse flushing water, and the reverse flushing pressure position is arranged in the sorting process. 0.03-0.06MPa
The mineral particles after grinding and sieving will be feed to the pipe through upper center in slurry form. The miner in the feeding dressing part is effected by the centrifugal force of high-speed rotation will upward along the cone. The light minerals From the upper periphery of the cone is discharged into the tailings tank and then exhaust from the outlet of tailings. The heavy minerals are deposited between bars Under the influence of centrifugal force, actually deposit on the inner cone.
It is widely used as a rough pick or pick for gold, tin, tungsten, titanium, hematite, etc.
Features and Advantages:
1 Automatic operation and automatic discharging
2 High concentrating ratio and high recovery;
3 Steady recovery performance;
4 Center discharge design for fast, secure concentrate removal;
5 Environmentally friendly (requires no chemical additives or reagents);6 Low water and electricity requirements;
7 Low production costs, durable wear parts, minimal maintenance requirements;
8 Compact design requiring less space, easy merged into the existing mining processing;
9 Quick paybacks on investment, typically less than half year.
|Concentrate weight per discharge